Lincoln SL-1 Grease Injector
Lincoln SL-1Â Grease Injector
- For single-line, high-pressure central lubrication system
- For dispensing lubricants compatible with flouroelastomer packings and viscosity up to NLGI No. 2Â
- Output is externally adjustableÂ
- Indicator stem permits visual check of injector operationÂ
- May be combined in a circuit of injectors SL-32, SL-3, SL-V, SL-V XL and/or SL-11
- Individual injectors can be easily removed for inspection or replacementÂ
- Available in stainless steel SAE 3 16, for application where environmental conditions are hazardous to carbon steel or in industries preferring stainless steel
Notes:Â
- Injector manifolds have 13/32″ (10.3mm) dia. mounting holes for 3/8″ boltÂ
- Injectors have flouroelastomer packings. Check compatibility with synthetic lubricantsÂ
- Injector rated for 350°F (176°C) max. ambient temperature, depending on lubricant used
- Injectors include fitting for filling feedlines via alternate outlet portÂ
- Output with adjustment screw hand-tightened is .009 cu. in. Maximum output is achieved with eight turns at .009 cu. in./turn.Â
| Model No. | 81770-1 |
| Brand | Lincoln |
| Output Minimum | .008 cu. in./.131 cc |
| Output Maximum | .080 cu. in./1.31 cc |
| Operating Pressure Minimum | 1850 psi/127 bar |
| Operating Pressure Maximum | 3500 psi/241 bar |
| Operating Pressure Typical | 2500 psi/172 bar |
| Operating Pressure Vent | 600 psi/41 bar |
| Connections Manifold Inlet | 3/8″ NPTF (f) |
| Connections Injector Outlet | 1/8″ NPTF (f) |
| Stainless Steel | 239351* One Injector Manifold |
| Number of Outlets | 1 |
